Video Input |
Digital: SD/HD-SDI x2: (1 channel, selectable input / SMPTE-259/292/296) HDMI x1 Analog: SD/HD component x3 BNCs: (SMPTE/EBU N10, Betacam 525 line, Betacam 525J, YPbPr 12-bit A/D, 2x oversampling) |
Video Output |
Digital: SD/HD-SDI x1: (SMPTE-259/292/296) HDMI x1 Analog: Composite x1 BNC: (NTSC, NTSCJ, PAL 12-bit D/A, 8x oversampling) SD/HD component x3 BNCs: (SD: SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB 12-bit D/A, 8x oversampling) (HD: YPbPr, RGB 12-bit D/A, 2x oversampling) (all video outputs are simultaneously active) |
Audio Input |
Digital: 24-bit, 8-channel AES x4 BNCs (48kHz) 24-bit, 8-channel SDI-embedded (48kHz) 2-channel HDMI-embedded Analog: 24-bit 2-channel balanced A/D XLR x2 (48kHz) Input level: line |
Audio Output |
Digital: 24-bit, 8-channel AES x4 BNCs (48kHz) 24-bit, 8-channel SDI-embedded (48kHz) 2-channel HDMI-embedded Analog: 24-bit 2-channel balanced D/A x2 XLR (48kHz) |
Network |
10/100/1000 Ethernet (RJ45) Embedded web server for remote control |
User Interface | 2 x 20 character display panel, with dedicated buttons |
Timecode |
LTC timecode input and output via SDI-embedded RP188 timecode On-screen timecode display on SDI 2 output |
Serial Port |
RS-422 (slave pinout) / 9-pin (available beginning with version 2.0 firmware) Connector pinout: 1 GND 2 TX - 3 RX + 4 GND 5 No Connection 6 GND 7 TX + 8 RX - 9 GND Shell GND |
Conversion |
10-bit hardware up-conversion: Anamorphic: full-screen Pillar box 4:3 -- results in a 4:3 image in center of screen with black sidebars Zoom 14:9 -- results in a 4:3 image zoomed slightly to fill a 14:9 image with black sidebars Zoom letterbox: image zoomed to fill screen Zoom wide: combination of zoom and horizontal stretch to fill 16:9 screen; this setting can introduce a small aspect ratio change 10-bit hardware down-conversion: Anamorphic: full-screen Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved Crop: image is cropped to fit new screen size 10-bit hardware cross-conversion: 1080i to 720p 720p to 1080i |
Storage Module Drive Bays | 2 (each with eject button and select LED) |
Power |
Voltage: 100-240 VAC Typical operating power: 40W |
Temperature |
Operating temperature: 41 to 104°F (5 to 40°C) Safe storage temperature (with power off): -4 to 140°F (-20 to 60°C) |
Rack Height | 1RU |
Dimensions |
1.75 x 19 x 12.5" (4.45 x 48.26 x 31.75 cm) (12.5" depth spans from the front panel to the back of the deepest connector) |
This website uses cookies (Learn more) and has a privacy policy (Learn more).